2020 Mako 21 LTS

Request Info

Print Basic Brochure Print Full Brochure

The MAKO® 21 LTS is an aggressive inshore predator that's ready for any challenge. Built to specs supplied by top redfish tournament pros, the 21 LTS sports our patented Rapid Planing System™ transom and MAKO performance fiberglass hull. This gets you on plane fast, increases motor efficiency and increases top-end speed by feeding air-free water directly into the prop.

The hull/deck is chemically bonded 360° and mechanically fastened every 6" with stainless fasteners for a lifetime of durability. And the 21 LTS comes standard with a tandem-axle aluminum trailer and a Mercury® 150HP outboard—yet you can optionally power up to 225 horsepower.

Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
Rapid Planing System™ (RPS) hull design for quick holeshots & sharp handling
100% composite construction for a lifetime of rugged durability
Raised bow & aft casting decks w/diamond-patterned non-skid surface
2 bow dry storage areas & bow port & starboard seats/storage boxes
Closed-molded fiberglass console w/2 NEW rod holders & a removable 72-qt. (68.14 L) cooler/fishbox
Anodized aluminum helm seat frame w/4-rod rocket launcher & removable 94-qt. (88.96 L) cooler w/integrated seat cushion
Aft 30-gal. (113.56 L) aerated livewell w/Pro-Air® system
NEW 10" (25.4 cm) hydraulic jack plate
Custom-matched aluminum trailer w/Sure Lube hubs

Basic Boat Info

Make: Mako

Model: 21 LTS

Year: 2020

Condition: New

Category: Power

Construction: Fiberglass

Dimensions

Length: 21 ft

Length Overall: 21'5 ft

Beam: 8'4 ft

Min Draft: 1 ft

Deadrise: 16 deg

Tanks

Fuel Tank Capacity: 60 gal

Other

Maximum Number Of Passengers: 7

Boat Class: Bay Boats

More Info :

Manufacturer Website

Additional Specs

Length: 21' 0"
Beam: 8' 4"
Bottom width: 7' 4"
Max. recommended HP: 225 HP
Fuel capacity: 60 gal.
Max. person capacity: 7 persons
Max. person weight: 1100 lbs.
Max. person, motor & gear weight: 2100 lbs.
Interior depth: 17"
Transom height at center line: 27"
Deadrise: 16 degrees
Draft: 12"
Dry weight: 2735 lbs.
Average hull weight: 2100 lbs.
Average package weight: 3310 lbs.
Package height: 9' 1"
Storage length: 26' 6"

Standard Features

Certification & Safety

Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
NMMA® certified
Factory leak tested for hull, plumbing & fitting integrity
Stainless steel hardware & fasteners for corrosion resistance
Fire extinguisher
Horn

Console

Elevated fiberglass console
Stainless steel destroyer-style steering wheel
SeaStar™ hydraulic steering
Analog tachometer, fuel gauge & water pressure gauge
Binnacle-mounted remote motor control w/power trim switch
Battery/gear storage
Removable forward-console 72-qt. (68.14 L) cooler/seat w/integrated cushion
Heavy-duty anodized aluminum grab rail
Contoured acrylic windscreen
Area to flush- & surface-mount additional electronics
2 stainless steel drink holders w/drainage system
NEW 2 console rod holders

Interior

NEW pre-wired for optional trolling motor
Anchor locker
2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
360° fishability
90-qt. (85.17 L) bow port & starboard boxes w/stainless steel lockable compression latches
136-qt. (128.7 L) bow center storage compartment w/locking stainless steel compression latch
Anodized aluminum helm seat frame w/4-rod rocket launcher & removable 94-qt. (88.96 L) cooler w/integrated seat cushion
2 large aft guttered & gasketed lock-down dry storage compartments
Closed-molded laminate hatch covers w/finished undersides
Lighted aft 30-gal. (113.56 L) livewell w/Pro-Air® aeration system
Closed-molded coaming boards
Bilge access hatch

Performance

Award-winning Rapid Planing System™ (RPS) transom for quicker holeshots, shallow-water abilities & better overall performance
NEW 10" (25.4 cm) hydraulic jack plate
Factory-rigged w/matched propeller

Hardware & Accessories

Seven 6" (15.24 cm) stainless steel low-profile pull-up cleats (bow, fore, midship & aft)
Powder-coated transom reinforcement plate w/MAKO® logo
Reboarding step & stainless steel grab handle
Stainless steel & bronze thru-hull fittings
Stainless steel bow & stern eyes
Stainless steel fuel fill

Construction & Exterior

Color: MAKO® Bone White gelcoat
100% composite construction
Encapsulated, fiberglass-infused transom w/high-density Coosa® Bluewater composite core
Molded, patterned non-skid casting platforms & cockpit sole
Console chemically bonded & mechanically fastened to deck w/.25" (6.35 mm) aluminum backing plates
Hull/deck joint chemically bonded & mechanically fastened w/stainless steel fasteners for strength & durability
Integrated 1-piece molded, gelcoated fiberglass stringer grid system w/gelcoat finish & fully injected w/closed-cell foam for USCG-approved flotation
High-density, fiberglass-infused trolling motor mounting core
Marine-grade stainless steel hardware & fasteners throughout
Gelcoat finish on all bulkheads & compartment interiors
Self-bailing cockpit
Composite seat substrates
Heavy-duty rub rail